92
D-Link DIR-815 User Manual
Section 3 - Configuration
Use this option to save the current router configuration
settings to a file on the hard disk of the computer you
are using. First, click the
Save
button. A file dialog will
appear, allowing you to select a location and file name
for the settings.
Use this option to load previously saved router configuration
settings. First, use the
Browse
option to find a previously
saved file of configuration settings. Then, click the
Upload.
Settings
button below to transfer those settings to the
router.
This option will restore all configuration settings back
to the settings that were in effect at the time the router
was shipped from the factory. Any settings that have
not been saved will be lost, including any rules that
you have created. If you want to save the current router
configuration settings, use the
Save
button above.
Click to reboot the router.
If you previously installed a language pack and want to
revert all the menus on the Router interface back to the
default language settings, click the
Clear
button.
Save Settings to
Local Hard Drive:
Load Settings from
Local Hard Drive:
Restore to Factory
Default Settings:
Reboot Device:
Clear Language
Pack:
System
This section allows you to manage the router’s configuration settings, reboot the router, and restore the router to the factory
default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that you’ve created.
