DVG-G5402SP User’s Manual
Telephone Interface Description
D-Link Systems, Inc.
5
1-2 Hardware Description
Front Panel
Power:
Power LED. A steady light indicates a proper
connection to a power source.
Prov./Alm.:
A blinking light indicates the DVG-G5402SP
can not register with SIP Server or can not get the IP
address. A blinking light also indicates the
DVG-G5402SP is attempting to connect with the
Provisioning server. Once the service connects, the LED
will turn off. The LED will light solid red if the self-test or
boot-up fails.
Register:
The Register LED will turn on and
continuously working when DVG-G5402SP is connected
to a VoIP service provider. The LED will flash if not
connected to a service provider.
WAN:
When a connection is established the LED will
light up solid. The LED will blink to indicate activity. If the
LED does not light up when a cable is connected, verify
the cable connections and make sure your devices are
powered on.
WLAN:
A steady light indicates a wireless connection. A
blinking light indicates that the VoIP Router is
receiving/transmitting from/to the wireless network.
LAN:
When a connection is established the LED (bottom)
will light up solid on the appropriate port. The LEDs will
blink to indicate activity. If the LED does not light up
when a cable is connected, verify the cable connections
and make sure your devices are powered on.
Phone:
This LED displays the VoIP status and
Hook/Ringing activity on the phone port that is used to
connect your normal telephone(s). If a phone connected
to a phone port is off the hook or in use, this LED will
light solid. When a phone is ringing, the indicator will
blink.
Line:
Light on means the line is in use (off-hook), and
vice versa.