D-Link NetDefendOS Скачать руководство пользователя страница 165 | Manualshive

Страница: 165 / 912

background image

3.3. Services

3.3.1. Overview

A

Service

object is a reference to a specific IP protocol with associated parameters. A service

definition is usually based on one of the major transport protocols such as TCP or UDP which is
associated with a specific source and/or destination port number(s). For example, the

HTTP

service is defined as using the TCP protocol with the associated destination port 80 and any
source port.

However, service objects are not restricted to just the TCP or UDP protocols. They can be used to
encompass ICMP messages as well as a user-definable IP protocol.

A Service is Passive

Services are passive NetDefendOS objects in that they do not themselves carry out any action in
the configuration. Instead, service objects must be associated with the security policies defined
by various NetDefendOS rule sets and then act as a filter to apply those rules only to a specific
type of traffic.

For example, an

IP Rule

or

IP Policy

in a NetDefendOS IP rule set has a service object associated

with it as a filtering parameter to decide whether or not to allow a specific type of traffic to
traverse the NetDefend Firewall. Inclusion in either IP rules or policies is one the most important
usage of service objects and it is also how ALGs become associated with IP rules since an ALG is
associated with a service and not directly with an IP rule.

For IP rules, the service is how an ALG becomes associated with an IP rule. An ALG is associated
with a service and not directly with an IP rule. For more information on how service objects are
used with IP rules, see

Section 3.6, “IP Rules and IP Policies”

For IP policies, there is no reason to use an ALG at all since all the ALG options become available
when the service is associated with the IP policy provided the

Protocol

property of the service

has been set.

Predefined Services

A large number of service objects are predefined in NetDefendOS. These include common
services such as

http

and

ftp

.

Predefined services can be used and also modified just like custom, user defined services.
However, it is recommended to not make any changes to predefined services and instead create
custom services with the desired characteristics.

Custom service creation is discussed in detail later in

Section 3.3.2, “Creating Custom Services”

Changes to Predefined Services in Version 11.01 and Later

With NetDefendOS version 11.01 and later, changes were made to the predefined

Service

objects.

In 11.01 and later the following predefined services and the associated predefined ALGs were
removed from a new NetDefendOS installation:

•

http (ALG only removed)

•

http-outbound (Service and ALG removed)

•

ftp-inbound (Service and ALG removed)

•

ftp-outbound (Service and ALG removed)

•

ftp-internal (Service and ALG removed)

Chapter 3: Fundamentals

165

«
...
163
164
165
166
167
...
»

Содержание NetDefendOS

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для NetDefendOS

Бренд: IBASE Technology Страницы: 69

Бренд: Nlynx Страницы: 75

Бренд: IOGear Страницы: 1

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды