3.85. LoopbackInterface
Description
Loopback interfaces will take all packets sent through them and pass them back up a different
interface as newly received packets.
Properties
Name
Specifies a symbolic name for the interface.
(Identifier)
LoopTo
Loopback interface. (Optional)
IP
Interface address.
Network
The network of the interface.
Broadcast
The broadcast address of the connected network.
(Optional)
Metric
Specifies the metric for the auto-created route.
(Default: 100)
AutoInterfaceNetworkRoute
Automatically add a route for this virtual LAN
interface using the given network. (Default: Yes)
EnableIPv6
Enable processing of IPv6 traffic on this interface.
(Default: No)
IPv6IP
IPv6 Interface address.
IPv6Network
The network of the interface.
SNMPIndex
Interface index assigned by the system when
persistent interface indexes are enabled. (Default:
0)
MemberOfRoutingTable
All or Specific. (Default: All)
RoutingTable
Specifies the PBR table to insert the interface IP
route into. It also means that the specified routing
table will be used for all routing lookups, unless
overridden by a PBR rule. (Default: main)
Comments
Text describing the current object. (Optional)
Chapter 3: Configuration Reference
249
Содержание NetDefend DFL-260E
