D-Link NetDefend DFL-260E, Справочное руководство по журналу операций

Страница: 43 / 652

1.3. Severity levels
An event has a default severity level, based on how serious the event is. The following eight
severity levels are possible, as defined by the Syslog protocol:
0 - Emergency Emergency conditions, which most likely led to the system being
unusable.
1 - Alert Alert conditions, which affected the functionality of the unit. Needs
attention immediately.
2 - Critical Critical conditions, which affected the functionality of the unit. Action
should be taken as soon as possible.
3 - Error Error conditions, which probably affected the functionality of the unit.
4 - Warning Warning conditions, which could affect the functionality of the unit.
5 - Notice Normal, but significant, conditions.
6 - Informational Informational conditions.
7 - Debug Debug level events.
Priority in Syslog Messages
In Syslog messages the priority is indicated by the parameter prio=nn.
Excluding Logged Messages
NetDefendOS allows the exclusion from logging of entire catageories of log messages or just
specific log messages. It is also possible to change the severity level of log messages so that a
specific category or a specific message has the severity reset to a particular level when it is sent
by NetDefendOS. These features are documented further in the NetDefendOS Administrators
Guide.
Chapter 1: Introduction
43