32
D-Link M30 AX3000 Dual-Band Wi-Fi 6 Router User Manual
Section 3 - Configuration
IPv4 - Dynamic IP (DHCP)
Select
Dynamic IP (DHCP)
to automatically obtain IP address information from your ISP. Select this option if your ISP does not
specify an IP address for use. Click
Save
at any time to save the changes you have made on this page.
Host Name:
The host name is optional but may be required by some ISPs. Leave
it blank if you are not sure.
Primary DNS
Server:
Enter the primary DNS server IP address assigned by your ISP. This
address is usually automatically obtained from your ISP.
Secondary DNS
Server:
Enter the secondary DNS server IP address assigned by your ISP. This
address is usually automatically obtained from your ISP.
MTU:
Maximum Transmission Unit - The default is 1500. You may need to
change the MTU for optimal performance with your ISP.
MAC Address
Clone:
The default MAC address is set as the physical interface MAC address
of port
1
on the router. You can use the drop-down menu to replace
the Internet port’s MAC address with the MAC address of a connected
client.
Advanced Settings...
