59
D-Link DIR-1960 User Manual
Section 4 - Configuration
Network
This section will allow you to change the local network settings of the router
and to configure the DHCP settings. In the Settings menu on the bar on the
top of the page, click
Network
. Click
Advanced Settings...
to expand the list
and see all of the options.
Network Settings
LAN IP Address:
Enter the IP address of the router. The default IP address is
192.168.0.1
.
If you change the IP address, once you click
Save
, you will need
to enter the new IP address in your browser to get back into the
configuration utility.
Subnet Mask:
Enter the subnet mask of the router. The default subnet mask is
255.255.255.0
.
Management
Link:
The default address to access the router’s configuration is
http://dlinkrouter.local/
Here, you can replace
dlinkrouter
with a
name of your choice.
Local Domain
Name:
Enter the domain name (optional).
Enable DNS Relay:
Disable to transfer the DNS server information from your ISP to your
computers. If enabled, your computers will use the router for a DNS
server.
