45
D-Link DIR-1960 User Manual
Section 4 - Configuration
IPv6 in IPv4 Tunnel
The user can configure the IPv6 connection to run in IPv4 Tunnel mode. IPv6
over IPv4 tunnelling encapsulates IPv6 packets in IPv4 packets so that IPv6
packets can be sent over an IPv4 infrastructure.
Remote IPv4
Address:
Enter the IPv4 remote address you will use.
Remote IPv6
Address:
Enter the IPv6 remote address you will use.
Local IPv4
Address:
Displays the current local IPv4 address.
Local IPv6
Address:
Enter the IPv6 local address you will use.
Subnet Prefix
Length:
Enter the subnet prefix length supplied by your ISP.
IPv6 DNS Settings
DNS Type:
Select either
Obtain DNS server address automatically
or
Use the
following DNS address
.
If
Use the following DNS address
is selected:
Primary DNS
Server:
Enter the primary DNS server address.
Secondary DNS
Server:
Enter the secondary DNS server address.
