41
D-Link DIR-1960 User Manual
Section 4 - Configuration
PPPoE
Select
PPPoE
if your ISP provides and requires you to enter a PPPoE username
and password in order to connect to the Internet.
MTU
PPPoE Session:
Choose
Share with IPv4
to re-use your IPv4 PPPoE username and
password, or
Create a new session
.
Address Mode
Select
Static IP
if your ISP assigned you an IP address. In most cases,
select
Dynamic IP
.
MTU
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
If you selected
Static IP
as the Address Mode and
Share with IPv4
as the PPPoE Session:
IP Address:
Enter the IP address provided by your ISP.
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
If you selected
Create a new session
as the PPPoE Session:
Username:
Enter the username provided by your ISP.
Password:
Enter the password provided by your ISP.
Address Mode:
Select either
Dynamic IP
or
Static IP
.
Service Name:
Enter the ISP service name (optional).
Reconnect Mode
Select either
Always On
or
Manual
.
