26
D-Link DIR-1960 User Manual
Section 4 - Configuration
PPPoE
Select
PPPoE
if your ISP provides and requires you to enter a PPPoE username
and password in order to connect to the Internet.
Username:
Enter the username provided by your ISP.
Password:
Enter the password provided by your ISP.
Reconnect Mode:
Select either
Always on
,
On Demand
, or
Manual
.
Maximum Idle
Time:
Enter a maximum idle time during which the Internet connection is
maintained during inactivity. To disable this feature, select
Always
on
as the reconnect mode.
Advanced Settings
Address Mode:
Select
Static IP
if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select
Dynamic IP
.
Dynamic IP
Service Name:
Enter the ISP service name (optional).
Primary DNS
Server:
Enter the primary DNS server IP address assigned by your ISP.
Secondary DNS
Server:
Enter the secondary DNS server IP address assigned by your ISP.
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP. The recommended setting is
Auto
.
