4 Configuration
D-Link Smart Managed Switch User Manual
3
3
3
3
Figure 4.45 - L2 Features > Link Aggregation
The fields that can be configured f are described below:
Item
Description
Link Aggregation Global Settings
Link Aggregation
Specify to enable or disable the Link Aggregation function.
Channel Group Information
ID
Select a link aggregation group.
Port
Select the ports to assign to the aggregation group.
Table 4.26
Click
Apply
to make the configurations take effect.
Click
Delete
to remove the Link Aggregation group.
NOTE:
Each combined port must be connected
to devices within the same VLAN group.
L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Settings
With Internet Group Management Protocol (IGMP) snooping, the Smart Managed Switch can make
intelligent multicast forwarding decisions by examining the contents of each frame’s Layer 2 MAC header.
By default, IGMP is disabled. If enabled, the Smart Managed Switch can recognize IGMP queries and
reports sent between network stations or devices and an IGMP host. With IGMP snooping enabled, the
Smart Managed Switch will forward multicast traffic only to the connections that requested it.
Figure 4.46 - L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Settings
The fields that can be configured for are described below:
Item
Description
IGMP Snooping
Specify to enable or disable the IGMP Snooping function of the
Switch.
Table 4.27
