4 Configuration
D-Link Smart Managed Switch User Manual
2
2
5
5
Figure 4.34 - L2 Features > VLAN > 802.1Q VLAN – Edit VID
Click
Apply
to make the configurations take effect.
Click
Previous Page
to discard any changed made and return to the previous page.
L2 Features > VLAN > Port-Based VLAN
Port-Based VLANs are the simplest and most common form of VLAN. It assigns physical LAN ports to
VLANs, effectively broadening their application. You can assign multiple ports to the same VLAN, or each
port to a separate VLAN.
Figure 4.35 - L2 Features > VLAN > Port-Based VLAN
The fields that can be configured are described below:
Item
Description
Port-Based VLAN
Select to enable or disable the Port-Based VLAN function. The
default is
Disabled
.
Table 4.17
Click
Apply
to make the configurations take effect.
To enable the Port-Based VLAN function, click
Enabled
and
Apply
, and the following will be displayed:
Figure 4.36 - L2 Features > VLAN > Port-Based VLAN - Enabled
Click
Rename
to rename the VLAN group.
Click
Delete
to remove the VLAN group.
NOTE:
When Port-Based VLAN is enabled, the
802.1Q VLAN and the Traffic Segmentation will
be disabled and their settings will be reset to
default. The Surveillance VLAN, Voice VLAN
and Management VLAN will be disabled. The
settings of IGMP Snooping and MAC Address
Table will be reset to default.
