4 Configuration
D-Link Smart Managed Switch User Manual
2
2
3
3
L2 Features > FDB > MAC Address Table
This window is used to view the entries listed in the MAC address table.
Figure 4.30 - L2 Features > FDB > MAC Address Table
The fields that can be configured are described below:
Item
Description
Port
Select a single port or all ports. The information for the port(s) will
be displayed in the information table.
Table 4.15
Click
Find
to locate a specific entry based on the information entered.
Click
Select All
to select up to 32 dynamic MAC addresses.
Click
Clean All
to clear the selected dynamic MAC addresses.
Click the Corresponding check box(es) in the Add column to select the specific dynamic MAC address(es).
Select the page number in the
Page
drop-down list to navigate to a specific page when multiple pages exist.
Click
Pre Page
to go to the previous page when multiple pages exist.
Click
Next Page
to go to the next page when multiple pages exist.
Click
Apply
to add the selected dynamic MAC address(es) to unicast static FDB.
NOTE:
When viewing the different FDB pages,
the device will take a moment to refresh the UI.
L2 Features > VLAN > 802.1Q VLAN
A Virtual Local Area Network (VLAN) is a group of ports that can be anywhere in the network, but
communicate as though they were in the same area.
