D-Link DXS-3600-16S, Руководство пользователя

Страница: 309 / 695

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
301
LINE Commands
30-1 line
This command is used to enter the specified LINE mode. The no form of this command is used to restore the default
configuration.
line {console | telnet | ssh}
no line {console | telnet | ssh}
Parameters
30-2 exec-timeout
This command is used to configure the connection timeout to this equipment in the LINE, use the exec-timeout
command. Once the connection timeout in the LINE is cancelled by the no exec-timeout command, the connection will
never be timeout.
exec-timeout minutes [ seconds ]
no exec-timeout
Parameters
console Specifies the console port.
telnet Specifies the Telnet terminal line.
ssh Specifies the SSH terminal line.
Default None.
Command Mode Global Configuration Mode.
Command Default Level Level: 15
Usage Guideline Access to the specified LINE mode.
Example This example shows how to enter the LINE mode from LINE CONSOLE.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#line console
DXS-3600-32S(config-line)#
minutes Specifies the minutes of specified timeout. This value must be between 0 and 1439.
seconds (Optional) Specifies the seconds of specified timeout.
Default The default timeout is 10min.
Command Mode Line Configuration Mode.
Command Default Level Level: 15
Usage Guideline If there is no input/output information for this connection within specified time, this
connection will be interrupted, and this LINE will be restored to the free status.
Example This example shows how to specify the connection timeout is 5’30”.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#line console
DXS-3600-32S(config-line)#exec-timeout 5 30
DXS-3600-32S(config-line)#