DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
39
SNMP Host Table Settings
This window is used to display and configure the recipient of the SNMP notification.
To view the following window, click
Management > SNMP > SNMP Host Table Settings
, as shown below:
Figure 4-14 SNMP Host Table Settings Window
The fields that can be configured are described below:
Parameter
Description
Host IPv6 Address
Enter the IPv4 address of the SNMP notification host.
Host IPv6 Address
Enter the IPv6 address of the SNMP notification host.
User-based Security Model
Select the security model here. Options to choose from are
SNMPv1
,
SNMPv2c
,
and
SNMPv3
.
•
SNMPv1
- Select to allow the group user to use the SNMPv1 security model.
•
SNMPv2c
- Select to allow the group user to use the SNMPv2c security
model.
•
SNMPv3
- Select to allow the group user to use the SNMPv3 security model.
Security Level
When selecting
SNMPv3
in the
User-based Security Model
drop-down list, this
option is available.
•
NoAuthNoPriv
- Specify that there will be no authorization and no
encryption of packets sent between the Switch and a remote SNMP
manager.
•
AuthNoPriv
- Specify that authorization will be required, but there will be no
encryption of packets sent between the Switch and a remote SNMP
manager.
•
AuthPriv
- Specify that authorization will be required, and that packets sent
between the Switch and a remote SNMP manger will be encrypted.
UDP Port
Enter the UDP port number. The default trap UDP port number is 162. The range
of UDP port numbers is from 1 to 65535. Some port numbers may conflict with
other protocols.
Community String /
SNMPv3 User Name
Enter the community string to be sent with the notification packet.
Click the
Add
button to add a new entry based on the information entered.
Click the
Delete
button to remove the specified entry.
Содержание DXS-3400 SERIES
Страница 1: ......
