DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
434
Parameter
Description
option will cross while seeking the network path between two devices. The range
for the TTL is 1 to 255 hops.
Port
Enter the port number here. The value range is from 1 to 65535.
Timeout
Enter the timeout period while waiting for a response from the remote device
here. A value of 1 to 65535 seconds can be specified. The default is 5 seconds.
Probe Number
Enter the probe time number here. The range is from 1 to 1000. If unspecified, the
default value is 1.
Click the
Start
button to initiate the route trace for each individual section.
After clicking the
Start
button in
IPv4 Trace Route
section, the following
IPv4 Trace Route Result
section will appear:
Figure 13-25 Trace Route (Start) Window
Click the
Back
button to stop the trace route and return to the IPv4 Trace Route section.
Reset
This window is used to reset the Switch’s configuration to the factory default settings.
To view the following window, click
Tools > Reset
, as shown below:
Figure 13-26 Reset Window
Select one of the following options:
•
The Switch will reset to its factory default settings and then reboot.
•
The Switch will reset to its factory default settings and then reboot. This option excludes the IP address.
•
The Switch will reset to its factory default settings and not reboot. This option excludes the stacking information.
Click the
Apply
button to initiate the reset.
Reboot System
This window is used to reboot the Switch and alternatively save the configuration before doing so.
To view the following window, click
Tools > Reboot System
, as shown below:
Содержание DXS-3400 SERIES
Страница 1: ......
