4 Configuration
D-Link DXS-1210 Series User Manual
54
and
IPv6
.
Action:
Select to remove or add the action field.
Address:
Enter the IP address to be sent.
Click
Apply
to accept the changes made.
L2 Features > LLDP > LLDP Management Address List
The LLDP Management Address List page displays the detailed management address information for the
entry.
Figure 4.89 – L2 Features > LLDP >LLDP Management Address List
Management Address:
Select IPv4, IPv6 or All address to be displayed. Click
Find
and the table will update
and display the values required.
Subtype:
Displays the managed address subtype. (e.g., MAC or IPv4)
Address:
Displays the IP address.
IF Type:
Displays the IF Type.
OID:
Displays the SNMP OID.
Advertising Ports:
Displays the advertising ports.
L2 Features > LLDP > LLDP Basic TLVs Settings
This LLDP Basic TLVs Settings page allows you to configure the LLDP Port settings.
Figure 4.90 – L2 Features > LLDP > LLDP Basic TLVs Settings
From Port / To Port:
A consecutive group of ports may be configured starting with the selected port.
Port Description:
Select to enable or disable the Port Description option.
System Name:
Select the system name to be enabled or disabled in the LLDP port. If select is Enabled,
users can specifies the content of system Name or all.
System Description:
Select to enable or disable the System Description option.
System Capabilities:
Select to enable or disable the System Capabilities option.
Click
Apply
to accept the changes made.
Содержание DXS-1210 Series
Страница 1: ...D X S 1 2 1 0 S e r i e s L 21 0G i g a b i t E t h e r n e t S w i t c hS e r i e s V e r 1 1 0 ...
Страница 2: ......
Страница 23: ...4 Configuration D Link DXS 1210 Series User Manual 1 17 7 Figure 4 24 User Guide Micro Site ...
Страница 119: ......
