manualshive.com logo in svg

D-Link DWS-4026, Руководство пользователя

Поделиться
Скачать
D-Link DWS-4026 Скачать руководство пользователя страница 202

D-Link Unified Access System

Software User Manual

12/10/09

Page 202

Creating MAC Filters

Document

34CSFP6XXUWS-SWUM100-D7

C

REATING

 MAC F

ILTERS

Use the MAC Filtering Configuration page to associate a MAC address with a VLAN and set of source ports and destination
ports. Any packet with a static MAC address in a specific VLAN is admitted only if the ingress port is included in the set of
source ports; otherwise the packet is dropped. If admitted, the packet is forwarded to all the ports in the destination list.

To access the MAC Filter Configuration page, click 

LAN > L2 Features > Filters > MAC Filter Configuration 

in the

navigation tree.

Figure 125:  MAC Filter Configuration

•

Click 

Submit

 to update the switch with the values on the screen. If you want the switch to retain the new values across

a power cycle, you must perform a save.

•

Click 

Delete

 to remove the currently selected filter.

•

Click 

Delete All

 to remove all configured filters.

Table 109:  MAC Filter Configuration Fields

Field

Description

MAC Filter

If no MAC filters are configured on the system, 

Create Filter

 is the only item in the 

drop-down menu. If one or more MAC filters exist, the list also contains the MAC 
address and associated VLAN ID of a configured filter.

MAC Address

The MAC address of the filter in the format 00:01:1A:B2:53:4D. You can only change 
this field when you have selected the "Create Filter" option.

Note: 

You cannot define filters for the following MAC addresses:

•

00:00:00:00:00:00

•

01:80:C2:00:00:00 to 01:80:C2:00:00:0F

•

01:80:C2:00:00:20 to 01:80:C2:00:00:21

•

FF:FF:FF:FF:FF:FF 

VLAN ID

The VLAN ID used with the MAC address to fully identify packets you want filtered. 
You can only change this field when you have selected the "Create Filter" option.

Source Port Members

Select the ports you want included in the inbound filter. If a packet with the MAC 
address and VLAN ID you selected is received on a port that is not in the list, it will be 
dropped.

Destination Port Members

Select the ports you want to include in the outbound filter. Packets with the MAC 
address and VLAN ID you selected will only be transmitted out of ports that are in the 
list.

Содержание DWS-4026

































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды