D-Link DWS-4026 Скачать руководство пользователя страница 188

Страница: 188 / 576

D-Link Unified Access System

Software User Manual

12/10/09

Page 188

Managing VLANs

Document

34CSFP6XXUWS-SWUM100-D7

•

If you make any changes to the page, click

Submit

to apply the changes to the system. To delete a VLAN, select the

VLAN from the

VLAN ID and Name

field, and then click

Delete

. You cannot delete the default VLAN.

VLAN S

TATUS

Use the VLAN Status page to view information about the VLANs configured on your system.

To access the VLAN Status page, click

LAN > Monitoring

> VLAN Summary > VLAN Status

in the navigation tree.

Figure 112: VLAN Status

•

Click

Refresh

to display the latest information from the router.

Table 97: VLAN Status Fields

Field

Description

VLAN ID

The VLAN Identifier (VID) of the VLAN. The range of the VLAN ID is 1 to 3965.

VLAN Name

The name of the VLAN. VLAN ID 1 is always named Default.

VLAN Type

The VLAN type, which can be one of the following:

• Default

: (VLAN ID = 1) -- always present

• Static

: A VLAN you have configured

• Dynamic

: A VLAN created by GVRP registration that you have not converted to

static, and that GVRP may therefore remove

Содержание DWS-4026
































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание DWS-4026

Отзывы:

D-Link DWS-4026, Руководство пользователя, Страница: 188 / 576

Результаты поиска

Содержание DWS-4026

Отзывы: