D-Link DWS-4000 Series, Справочник команд интерфейса командной строки, Страница: 241 / 566

233
Unified Switch Channel and Power Commands
show wireless power-plan proposed
This command displays the proposed power adjustments for a manual request to run the power algorithm. The command
does not accept any arguments. The proposed power changes may be cleared or applied using the
wireless power-plan
command. If the IP address is not entered, the command displays a proposed summary for all peer switches. If a peer switch
IP address is entered, detailed proposed entries for that peer switch are displayed.
Example:
The following shows example CLI display output for the command.
(DWS-4026) #show wireless power-plan proposed
Switch IP Address Current Status
----------------- ---------------
10.0.0.1 Algorithm Completed
10.254.22.1 Algorithm Completed
10.254.22.15 Algorithm Completed
(DWS-4026) #show wireless power-plan proposed 10.254.22.15
Current Status................................. Algorithm Complete
No proposed power adjustments to display.
Field Description
Power Plan Mode The mode for automatic power adjustment, manual or interval. If the mode is manual, the power
algorithm will not run unless you request it.
Power Plan Interval If the power adjustment mode is interval, this indicates the frequency in minutes that power
adjustments are computed and applied.
Format
show wireless power-plan proposed [<ipaddr>]
Mode Privileged EXEC
Field Description
ipaddr The <ip addr> is a valid IP address.
Current Status Indicates the status of a manual power adjustment request.
AP MAC Address The managed AP Ethernet MAC address.
Location A descriptive location string configured for the managed AP.
Radio The radio interface on the managed AP.
Current Power The current transmit power on the managed AP radio.
New Power The new transmit power computed by the power algorithm.