D-Link DWS-4000 Series, Справочник команд интерфейса командной строки, Страница: 240 / 566

D-Link Unified Switch CLI Command Reference
232
© 2009 D-Link Corporation. All Rights Reserved
show wireless channel-plan proposed
This command displays the proposed channel plan changes for a manual request to run the channel algorithm. The channel
plan type argument must be specified. The channel algorithm is run separately for each radio frequency. The proposed
channel changes may be cleared or applied using the
wireless channel-plan command. If the IP address is not entered,
the command displays a proposed summary for all peer switches. If a peer switch IP address is entered, detailed proposed
entries for that peer switch are displayed.
Example: The following shows example CLI display output for the command.
(DWS-4026) #show wireless channel-plan proposed a
Switch IP Address Current Status
------------------ ---------------
10.0.0.1 Apply Complete
10.254.22.1 Apply Complete
10.254.22.15 Apply Complete
(DWS-4026) #show wireless channel-plan proposed a 10.254.22.15
Current Status................................. Apply Complete
Current New
AP MAC Address Location Radio Channel Channel
---------------- --------------------------- ----- ------- -------
00:00:85:00:50:00 Third floor 1 11 1
show wireless power-plan
This command displays status and configuration for automatic power adjustment. The command does not accept any
arguments.
Format
show wireless channel-plan proposed {an | bgn} [<ipaddr>]
Mode Privileged EXEC
Field Description
ipaddr The
<ipaddr>
is a valid IP address.
an Configure channel plan mode for 802.11a/n.
bgn Configure channel plan mode for 802.11b/g/n.
Current Status Indicates the status of a manual channel plan request.
AP MAC Address The managed AP Ethernet MAC address.
Location A descriptive location string configured for the managed AP.
Radio The radio interface on the managed AP.
Current Channel The current channel on the managed AP radio.
New Channel The new channel computed by the channel algorithm.
Format
show wireless power-plan
Mode Privileged EXEC