D-Link DWS-4000 Series, Справочник команд интерфейса командной строки, Страница: 138 / 566

D-Link Unified Switch CLI Command Reference
130
© 2009 D-Link Corporation. All Rights Reserved
port-security max-static
This command sets the maximum number of statically locked MAC addresses allowed on a port.
no port-security max-static
This command sets maximum number of statically locked MAC addresses to the default value.
port-security mac-address
This command adds a MAC address to the list of statically locked MAC addresses. The
<vid>
is the VLAN ID.
no port-security mac-address
This command removes a MAC address from the list of statically locked MAC addresses.
port-security mac-address move
This command converts dynamically locked MAC addresses to statically locked addresses.
show port-security
This command displays the port-security settings. If you do not use a parameter, the command displays the settings for the
entire system. Use the optional parameters to display the settings on a specific interface or on all interfaces.
Default 20
Format
port-security max-static <maxvalue>
Mode Interface Config
Format
no port-security max-static
Mode Interface Config
Format
port-security mac-address <mac-address> <vid>
Mode Interface Config
Format
no port-security mac-address <mac-address> <vid>
Mode Interface Config
Format
port-security mac-address move
Mode Interface Config
Format
show port-security [{<slot/port> | all}]
Mode Privileged EXEC
Term Definition
Admin Mode Port Locking mode for the entire system. This field displays if you do not supply any parameters.