DWR-980
Wireless AC1200 4G LTE Router with VDSL2 Support,
Gigabit Ethernet Ports, and 2 FXS Ports
User Manual
Configuring via Web-based Interface
Call Feature Codes
On the
VoIP / Call Feature Codes
page, you can allow changing some parameters of the router
directly from the phone sets connected to the FXS ports of the router.
Figure 168. The
VoIP / Call Feature Codes
page.
To enable or disable all the codes for the phones connected to the FXS ports of the router, in the
Line 1
and/or
Line 2
section, in the
Dialing from Phone
subsection, click the
ALLOW
or
DENY
button correspondingly.
To inform or not to inform the SIP server when a user dials the codes on the phones, in the
Sending to Server
subsection, click the
ALLOW
or
DENY
button correspondingly.
To specify a call feature code for transferring a call to another phone, in the
Line 1
and/or
Line 2
section, enter a code in the
Transfer code
field and click the
APPLY
button (
). Use
digits (0-9), the characters * (asterisk) and # (pound).
Page
220
of 266
