background image

DWL-P100

DWL-P100

DWL-P100

DWL-P100

DWL-P100

Power Over

Power Over

Power Over

Power Over

Power Over

Ethernet Adapters

Ethernet Adapters

Ethernet Adapters

Ethernet Adapters

Ethernet Adapters

48V DC Power Adapter

©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
specifications subject to change without notice. DWL-P100.12232002

About Power Over Ethernet.

About Power Over Ethernet.

About Power Over Ethernet.

About Power Over Ethernet.

About Power Over Ethernet.

Check Your Package Contents

Check Your Package Contents

Check Your Package Contents

Check Your Package Contents

Check Your Package Contents

DWL-P100 Base Unit and Terminal Unit

Female-to-Female Power Connector

Ethernet (CAT5 UTP/Straight Through) Cable

        Using a power supply
        with a different voltage
rating will damage and void
the warranty of this product.

If any of the above items are missing, please contact your reseller.

The DWL-P100 Power Over Ethernet (POE) Adapters are designed to supply
operational power to a Wireless Access Point. These adapters eliminate the need to
use an additional AC/DC power supply at the Access Point giving you the ability to
mount an Access Point virtually anywhere in a building where power outlets are not
available, ( for example in, ceilings, attics). D-Link’s DWL-P100 Adapters take
advantage of the unused cable pairs within Ethernet Cat 5 cabling. The Base Unit
inserts DC voltage into the unused wires therefore allowing the single Category 5 cable
to carry both Ethernet data and DC power to an Access Point. The POE Terminal Unit
splits the data and DC power apart, which is then supplied to the Access Point.

Warning

Warning

Warning

Warning

Warning: Please follow the

: Please follow the

: Please follow the

: Please follow the

: Please follow the

instructions in this guide

instructions in this guide

instructions in this guide

instructions in this guide

instructions in this guide

carefully.  Connecting these

carefully.  Connecting these

carefully.  Connecting these

carefully.  Connecting these

carefully.  Connecting these

adapters incorrectly may result in

adapters incorrectly may result in

adapters incorrectly may result in

adapters incorrectly may result in

adapters incorrectly may result in

damage to you network devices.

damage to you network devices.

damage to you network devices.

damage to you network devices.

damage to you network devices.

Содержание DWL-P100








Отзывы: