Wireless Controller
CLI Reference Guide
58
SNMP managers. To allow any IP on the netw ork to
manager the device enter 255.255.255.0. For a specific
host, enter 255.255.255.255. To allow global access,
enter 0.0.0.0.
IP address
AAA.BBB.CCC.DDD w here
each part is in the range 0-255
6
accessType
SNMP trap port the trap messages w ill be sent to.
String
7
community
The community string to w hich the agent belongs. Most
agents are configured to listen for traps in the Public
community
String
9.12 system snmp access edit
<ltrowid>
S.No
Com mand Nam e
Description
Type and Description
1
<ltrow id>
snmp configuration mode
Unsigned integer
2
save
Save SNMP access control configuration changes.
3
exit
Save SNMP access configuration changes and exit
current mode.
4
cancel
Roll back snmp configuration changes.
5
agent
The IP address of the SNMP agent.
IP address
AAA.BBB.CCC.DDD w here
each part is in the range 0-255
6
subnet_mask
The netw ork mask used to determine the list of allow ed
SNMP managers. To allow any IP on the netw ork to
manager the device enter 255.255.255.0. For a specific
host, enter 255.255.255.255. To allow global access,
enter 0.0.0.0.
IP address
AAA.BBB.CCC.DDD w here
each part is in the range 0-255
7
accessType
SNMP trap port the trap messages w ill be sent to.
String
8
community
The community string to w hich the agent belongs. Most
agents are configured to listen for traps in the Public
community
String
9.13 system snmp access delete
<ltrowid>
S.No
Com mand Nam e
Description
Type and Description
1
<ltrow id>
snmp access configuration mode
Unsigned integer
9.14 system switch_settings power_saving
configure
S.No
Com mand Nam e
Description
Type and Description
1
save
Save pow erMode configuration changes.
2
exit
Save pow er mode configuration changes and exit current
mode.
3
cancel
Roll back content Filtering ow er mode configuration
changes.
4
link_status
Enable/Disable Link status
Boolean choice
5
cable_length
enable/disable Cable Length
Boolean choice