DVG-5402G/GF
Wireless AC1200 MU-MIMO Dual Band
Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port
User Manual
Configuring via Web-based Interface
Connections Setup
In this menu you can configure basic parameters of the router's local area network and configure
connection to the Internet (a WAN connection).
WAN
On the
Connections Setup
/ WAN
page, you can create and edit connections used by the router.
By default, a
Dynamic IPv4
connection is configured in the system. It is assigned to the
SFP
port
of the router.
Figure 65. The
Connections Setup / WAN
page. The simplified mode.
To edit an existing connection, click the
EDIT
button. On the opened page, change the needed
parameters and click the
APPLY
button.
To disconnect a connection and establish it again, click the
RECONNECT
button.
To remove an existing connection and create a new one, click the
CHANGE CONFIGURATION
button. Upon that the connection creation page opens.
To create several WAN connections, go to the advanced mode. To do this, click the
ADVANCED
MODE
button.
!
When connections of some types are created,
the
Connections Setup
/ WAN
page
is
automatically displayed in the advanced mode.
Page
83
of 311
