DVG-5402G/GF
Wireless AC1200 MU-MIMO Dual Band
Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port
User Manual
Configuring via Web-based Interface
Creating Bridge WAN Connection
On the connection creation page, go to the
General Settings
tab. Then select the relevant value
from the
Connection type
drop-down list and specify the needed values.
Figure 90. The page for creating a new
Bridge
connection. The
General Settings
section.
Parameter
Description
General Settings
Interface
A physical or virtual WAN interface to which the new connection
will be assigned.
Connection name
A name for the connection for easier identification.
Enable connection
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
Page
112
of 311
