xStack Storage DSN-3200 & DSN-3400
ECN – Drive Activity Light Fix
D-Link Systems, Inc. Page
9
February 7, 2008
Step 6) For each 10-position header, you must remove the 4-position jumper block as seen in figure 6. You
will then see an empty 10-position header like that shown in figure 9. The top-right pin is removed and
will provide a guide for installation of the new resistor pack.
Figure 9: The empty 10-position header
Step 7) Familiarize yourself with the resistor pack. Note that two of the positions are empty as seen in
figure 10. Also be aware that one of the holes on the connector has been blocked as shown in figure 11.
This blocked hole will need to match with the missing pin shown in figure 9.
Figure 10: The resistor pack: side view
