52
D-Link DSL-2740M User Manual
Section 3 - Configuration
Inbound Filter
Click
Inbound Filter
on the navigation menu to configure the Inbound Filter. The Inbound
Filter allows you to place filtering rules on a per IP basis. Using this tool you may restrict
access to or block traffic from a specific remote IP address or range.
The currently defined Inbound Filter rules are listed here. Click
Remove
to remove a defined
rule.
ACTIVE INBOUND FILTER
Filter Name:
Enter a name for this Inbound Filter.
Protocol:
Select
TCP
,
UDP
, or
ICMP
from the dropdown menu.
Source IP address:
Enter the source IP address.
Source Subnet
Mask:
Enter the source subnet mask.
Source Port:
Enter the source port.
Destination IP
address:
Enter the destination IP address.
Destination Subnet
Mask:
Enter the destination subnet mask.
Destination Port:
Enter the destination port.
Click the
Add/Apply
button to add your Inbound IP Filter Rule.
ADD INBOUND IP FILTER
