69
D-Link DSL-226 User Manual
Section 4 - Configuration
Static Route
The Static Routes page allows you to define custom routes to control how data
traffic is moved around your network. To access this page, go to
Features >
Static Route.
If you wish to remove a rule, click in the
Delete
column. If you wish to edit a
rule, click in the
Edit
column. If you wish to create a new rule, click the
Add
Rule
button. Click
Save
when you are done.
Complete the following to create or edit a rule:
Create New Rule
Destination
Address:
Enter the destination subnetwork IP address.
Destination
Subnet Mask
(IPv4):
Enter the subnet mask of the destination address. The subnet mask
determines an IPv4 subnetwork.
Gateway IP
Address:
Enter your next hop gateway to be taken if this route is used. Or select
the interface to transit the packets of this static route. (Go to
Settings
> Internet
to obtain the configured WAN interfaces.) PVC denotes the
WAN port configured with ADSL service and PTM denotes the WAN
port configured with VDSL service.
Metric:
The route metric is a value from 0 to 15 that indicates the cost of
using this route.
Click
Apply
when you are done. A maximum of 16 rules can be defined.
