37
D-Link DSL-226 User Manual
Section 4 - Configuration
Connection Type: Static IP
Select
Static IP Address
if your ISP provides you with a specific IP address.
IPv4 Settings
Connection:
Select
Static IP Address
.
Protocol
Select
IPv4, IPv6
or
IPv4/IPv6
for both IPv4 and IPv6 addressing
mechanism. If you choose IPv6, refer to the below IPv6 Settings.
Connection Type:
Select
Bridged IP LLC, Routed IP LLC, Routed IP VC-Mux
or
Bridged
IP VC-Mux
as the encapsulation method. This is only available for
ADSL.
IP Address:
Enter the IP address provided by your ISP.
Subnet Mask:
Enter the subnet mask provided by your ISP.
Gateway Address:
Enter the default gateway address provided by your ISP.
Primary DNS
Server
Enter the primary DNS server IP address assigned by your ISP. This
address is usually obtained automatically from your ISP.
Secondary DNS
Server
Enter the secondary DNS server IP address assigned by your ISP. This
address is usually obtained automatically from your ISP.
Advanced Settings
MTU:
Maximum Transmission Unit (576-1516) - you may need to change
the MTU for optimal performance with your ISP.
Usage:
Select None or Default Route to use this WAN connection type as the
default route.
