DPN-1021G
GPON ONT VoIP Gateway with 1 GPON
Port, 1 10/100/1000Base-T Port, 1 10/100Base-TX Port,
and 1 FXS Port
User Manual
Configuring via Web-based Interface
PON
On the
Advanced / PON
page, physical parameters of the gateway transmitter and the status of
synchronization with the OLT device are displayed. In addition, you can specify data for
authorization on this page.
Figure 52. The
Advanced / PON
page.
If authorization is needed for synchronization with the OLT, enter the authorization data provided
by your ISP in the fields of the
Settings
section and select the needed value from the
OMCI
mode
drop-down list (
ONT Management and Control Interface
). Then click the
APPLY
button.
In the
PON Status
section, the current state of the transmitter is displayed.
In the
GPON Status
section, the state of synchronization with the OLT and the serial number of
the gateway used for identification by the OLT are displayed.
Page
69
of 145
