DPN-1021G
GPON ONT VoIP Gateway with 1 GPON
Port, 1 10/100/1000Base-T Port, 1 10/100Base-TX Port,
and 1 FXS Port
User Manual
Configuring via Web-based Interface
Telnet
On the
System / Telnet
page, you can enable or disable access to the device settings via TELNET
from your LAN. By default, access is enabled.
Figure 98. The
System / Telnet
page.
To disable access via TELNET, move the
Enable Telnet
switch to the left and click the
APPLY
button.
To enable access via TELNET again, move the
Enable Telnet
switch to the right. In the
Port
field, enter the number of the gateway's port through which access will be allowed (by default, the
port
23
is specified). Then click the
APPLY
button.
Page
136
of 145
