91
D-Link DIR-895L User Manual
Section 4 - Configuration - Router Mode
IPv6 Host
The IPv6 host settings are found at the bottom of the Dynamic DNS page.
If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to
edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click
the
Add Record
button. Click
Save
when you are done. If you edit or create a rule, the
following options will appear:
Create New Record
Host Name:
Enter the host name that you registered with your dynamic DNS
service provider.
IPv6 Address:
Enter the IPv6 address of the dynamic DNS server. Alternatively, select
the server device in the drop-down menu.
Click
Save
when you are done.
DIR-895L HW:A1
FW:1.12
Features >> Dynamic DNS
Dynamic DNS
Dynamic Domain Name Service allows your router to associate an easy-to-remember domain name such as
[YourDomainName].com with the regularly changing IP address assigned by your Internet Service provider.
This feature is helpful when running a virtual server.
Settings
Features
Home
Management
Save
Enable Dynamic DNS:
Enabled
Status: Disconnected
Server Address:
dyndns.com
dyndns.com
⌵
Host Name:
User Name:
Password:
Time Out:
24
hours
Status
Host Name
IPv6 Address
Edit
Delete
✓
Test
2001::
Remaining: 9
Add Record
COPYRIGHT © 2016 D-Link
Host Name:
IPv6 Address:
<< Computer Name
⌵
Create New Record
Apply