67
D-Link DIR-895L User Manual
Section 4 - Configuration - Router Mode
6rd
If your ISP uses the 6rd protocol for IPv6 connectivity, configure it using these options.
Assign IPv6 Prefix:
Currently unsupported.
Primary DNS
Server:
Enter the primary DNS server address.
Secondary DNS
Server:
Enter the secondary DNS server address.
6rd Manual Configuration
Enable Hub and
Spoke Mode:
Enable if you want to minimize the number of routes to the destination
by using a hub and spoke method of networking.
6rd Configuration:
Choose the
6rd DHCPv4 Option
to automatically discover and
populate the data values, or
Manual Configuration
to enter the
settings yourself.
If you selected
Manual configuration
, configure the following options:
6rd IPv6 Prefix:
Enter the 6rd IPv6 prefix and mask length supplied by your ISP.
WAN IPv4 Address
Displays the router’s IPv4 address.
6rd Border Relay
IPv4 Address:
Enter the 6rd border relay IPv4 address settings supplied by your ISP.
LAN IPv6 Address Settings
LAN IPv6 Address:
Displays the router’s LAN IPv6 Address link-local address.
LAN IPv6 Link-
Local Address:
Displays the router’s LAN link-local address.
My Internet Connection is:
6rd
⌵
DIR-895L HW:A1
FW:1.12
Settings >> Internet >> IPv6
Settings
Home
Features
Management
Assign IPv6 Prefix:
Primary DNS Server:
Secondary DNS Server:
IPv4
Save
IPv6
All of your IPv6 Internet and network connection details are displayed on this page.
6RD MANUAL CONFIGURATION
Enable Hub and Spoke Mode:
Enabled
6rd Configuration:
6rd DHCPv4 Option
⌵
6RD MANUAL CONFIGURATION
Enable Hub and Spoke Mode:
Enabled
6rd Configuration:
Manual Configuration
⌵
6rd IPv6 Prefix:
/
32
WAN IPv4 Address:
/
6rd Border Relay IPv4 Address:
LAN IPv6 Address:
Not Available
LAN IPv6 Link-Local Address:
Not Available
LAN IPv6 ADDRESS SETTINGS
Advanced Settings ...