35
D-Link DIR-895L User Manual
Section 4 - Configuration - Router Mode
Configuration - Router Mode
Enter your password. If you previously followed the setup wizard, please use the admin
password you entered during the wizard. Otherwise, leave the password blank. Click
Log
In
to proceed.
Note:
If you cannot remember your password and cannot log in, press the reset button on the
back of the device for longer than 10 seconds to restore the router to its default settings.
If you are having trouble logging in or experiencing trouble with the configuration utility, try
clearing your browser cache or try using your web browsers 'private browser' or incognito
mode.
To access the configuration utility, open a web browser such as Internet Explorer and enter
http://dlinkrouter.local./
or you may also connect by typing the IP address of the router
(by default this is
http://192.168.0.1
) in the address bar.
Admin Password:
Log In
The router’s home page will open displaying its current connection status.
The bar at the top of the page has quick access to Settings and Management functions. You
may quickly jump back Home at any time.
Note:
The system will automatically log out after a period of inactivity.
Internet
COPYRIGHT © 2016 D-Link
DIR-895L HW:A1
FW:1.12
Settings
Features
Management
Home
Internet
DIR-895L
Connected Clients:
1
USB Device
Internet Connected
Click on any item in the diagram for more information.
IPv4 /
IPv6
Cable Status:
Connected
MAC Address:
FF:FF:FF:FF:FF:FF
Connection Type:
Dynamic IP (DHCP)
IP Address:
172.17.5.120
Network Status:
Connected
Subnet Mask:
255.255.255.0
Connection Uptime:
1 Day 3 Hour 50 Min 58 Sec
Default Gateway:
172.17.5.1
Release IP Address
Primary DNS Server:
172.17.5.5
Secondary DNS Server:
172.17.5.6
Go to settings
