DIR-882
AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
Configuring via Web-based Interface
Changing LAN IPv4 Address
This configuration step is available for the
Access point
and
Repeater
modes.
1. Select the
Automatic obtainment of IPv4 address
to let DIR-882 automatically obtain
the LAN IPv4 address.
2. In the
Hostname
field, you should specify a domain name of the router using which you
can access the web-based interface after finishing the Wizard. Enter a new domain name of
the router ending with
.local
or leave the value suggested by the router.
!
I n order to access
the web-based interface using the domain name,
i n the address bar of the
web browser,
enter the name of the
router
with a dot at the end.
If you want to manually assign the LAN IPv4 address for DIR-882, do not select the
Automatic
obtainment of IPv4 address
checkbox and fill in the
IP address
,
Subnet mask
,
DNS IP
address,
Hostname
fields and, if needed, the
Gateway IP address
field. Make sure that the
assigned address does not coincide with the LAN IPv4 address of the router to which your device
connects.
Figure 44. The page for
changing the LAN IPv4 address
.
3. Click the
NEXT
button to continue or click the
BACK
button to return to the previous page.
Page
58
of 303
