55
D-Link DIR-880L User Manual
Section 3 - Configuration
Wireless (Router Mode)
Enable or disable the wireless frequency band.
Create a
Wi-Fi Name
for your wireless network using up to 32
characters.
Create a
Password
to use for wireless security. Wireless clients will
need to enter this password to successfully connect to the network.
Select
None
,
WEP
, or
WPA/WPA2-Personal (
recommended).
Select the preferred wireless networking standard for each band.
The available options will depend on the wireless frequency band,
as well as the currently selected security mode.
Select the desired channel. The default is
Auto
(recommended).
Select the desired wireless transmission power (
High
,
Medium
or
Low
).
For the 2.4GHz band:
Select
Auto 20/40 MHz
if you are using both 802.11n and non-
802.11n wireless devices, or select
20 MHz
if you are not using any
802.11n wireless clients.
For the 5GHz band:
Select
Auto 20/40/80 MHz
if you are using 802.11ac, 802.11n, and
non-802.11n wireless devices, or select
Auto 20/40 MHz
if you are
using both 802.11n and non-802.11n wireless devices.
Status:
Wi-Fi Name
(SSID):
Password:
Security Mode:
802.11 Mode:
Wi-Fi Channel:
Transmission
Power:
Channel Width:
From the
Settings
menu, click
Wireless
to begin wireless configuration. You will see the
Wi-Fi Name (SSID)
and
Password
for both the 2.4GHz and 5GHz bands. Click
Advanced Settings...
to expand the list and allow you to view all fields
corresponding with each frequency band.
The following options apply to both the 2.4GHz and the 5GHz wireless frequency bands:
