DIR-615
Wireless N300 Router
User Manual
Configuring via Web-based Interface
System Log
On the
System / System log / Configuration
page, you can set the system log options and
configure sending the system log to a remote host.
Figure 152. The
System / System log / Configuration
page.
To enable logging of the system events, select the
Logging
checkbox. Then specify the needed
parameters.
Control
Description
Logging type
Select a type of logging from the drop-down list.
•
Local
: the system log is stored in the router's memory (and
displayed on the
System / System log / Log
page). When
this value is selected, the
Server
and
Port
fields are not
displayed.
•
Remote
: the system log is sent to the remote host specified in
the
Server
field.
•
Local and remote
: the system log is stored in the router's
memory (and displayed on the
System / System log / Log
page) and sent to the remote host specified in the
Server
field.
Logging level
Select a type of messages and alerts/notifications to be logged.
Server
The IP or URL address of the host from the local or global network,
to which the system log will be sent.
Page
195
of 208
