56
D-Link DIR-604 User Manual
Section 3 - Configuration
MAC Filtering
Select
Turn MAC Filtering Off
,
Turn MAC
Filtering ON and ALLOW computers listed to
access the network
, or
Turn MAC Filtering
ON and DENY computers listed to acces the
network
from the drop-down menu.
Enter the MAC address you would like to filter.
To find the MAC address on a computer, please
refer to the Networking Basics section in this
manual.
Select a DHCP client from the drop-down menu
and click
<<
to copy the MAC Address from the
DHCP client.
Select a schedule for when the Network Filter
will be enabled. The user can click the
Add New
button to bring up the Schedule page. This is
used to configure a new schedule.
Configure
MAC
Filtering:
MAC Address:
DHCP Client
List:
Schedule:
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses
from accessing the network. You can either manually add a MAC address or select the MAC address from the list of
clients that are currently connected to the Router.
