20
D-Link DIR-604 User Manual
Section 3 - Configuration
Set the transmit power of the antennas.
Beacons are packets sent by an Access Point to
synchronize a wireless network. Specify a value.
100 is the default setting and is recommended.
This value should remain at its default setting of
2432. If inconsistent data flow is a problem, only
a minor modification should be made.
The fragmentation threshold, which is specified
in bytes, determines whether packets will be
fragmented. Packets exceeding the 2346 byte
setting will be fragmented before transmission.
2346 is the default setting.
(Delivery Traffic Indication Message) 1 is the
default setting. A DTIM is a countdown informing
clients of the next window for listening to
broadcast and multicast messages.
Select
Short
Preamble
or
Long Preamble
.
The preamble defines the length of the CRC block (Cyclic Redundancy Check is a common technique for detecting data
transmission errors) for communication between the wireless router and the roaming wireless network adapters. Note: High
network traffic areas should use the
Short Preamble
type.
Select
None
,
Always
, or
Auto
.
Use the drop-down menu to selec the wireless modes you want to enable on the router. The available options are
802.11n
only
,
802.11 Mixed (g/b)
, and
802.11 Mixed (n/g/b)
.
Tick this check box to reduce the guard interval time therefore increasing the data capacity. However, it is less reliable and
may create higher data loss.
Transmit Power:
Beacon
Period:
RTS
Threshold:
Fragmentation:
DTIM
Interval:
Preamble
Type:
CTS Mode:
Wireless
Mode:
Short Guard
Interval:
Advanced Wireless Settings
