38
D-Link DHP-W312AV User Manual
Section 3 - Configuration
Configuring WPA/WPA2 Personal
It is recommended to enable encryption on your wireless DHP-W312AV before your wireless network adapters. Please establish wireless connectivity
before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1. Log into the web-based configuration by opening a web browser
and entering the IP address of the DHP-W312AV (
192.168.0.50
)
or
http://dlinkap.local.
(on the Wi-Fi Configuration Card) then
click on
Setup
and then click
Wireless Settings
on the left side.
2. For
Security Mode,
select
WPA/WPA2Personal
.
3. For
Wi-Fi Password
, enter a key. The password must be
between 8-63 characters and use numbers, letters, and/or special
characters.
6. Click
Save Settings
at the bottom of the window to save your
settings. If you are configuring the DHP-W312AV with a wireless
adapter, you will lose connectivity until you enable WPA on your
adapter and enter the same passphrase as you did on the DHP-
W312AV.