DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
368
Parameter
Description
Trap State
Select to enable or disable the DoS attack prevention trap state here.
Click the
Apply
button to accept the changes made.
The fields that can be configured in
DoS Attack Prevention Settings
are described below:
Parameter
Description
DoS Type Selection
Tick the DoS type option that will be prevented here.
State
Select to enable or disable the global DoS attack prevention state here.
Action
Select the action that will be taken when the DoS attack was detected here.
The only option to select here is
Drop
.
Click the
Apply
button to accept the changes made.
SSH
Secure Shell (SSH) is a program allowing secure remote login and secure network services over an insecure network.
It allows a secure login to remote host computers, a safe method of executing commands on a remote end node, and
will provide secure encrypted and authenticated communication between two non-trusted hosts. SSH, with its array of
unmatched security features is an essential tool in today’s networking environment. It is a powerful guardian against
numerous existing security hazards that now threaten network communications.
The steps required to use the SSH protocol for secure communication between a remote PC (the SSH client) and the
Switch (the SSH server) are as follows:
•
Create a user account with admin-level access using the User Accounts window. This is identical to creating
any other admin-level User Account on the Switch, including specifying a password. This password is used to
logon to the Switch, once a secure communication path has been established using the SSH protocol.
•
Configure the User Account to use a specified authorization method to identify users that are allowed to
establish SSH connections with the Switch using the SSH User Authentication Mode window. There are three
choices as to the method SSH will use to authorize the user, which are Host Based, Password, and Public Key.
•
Configure the encryption algorithm that SSH will use to encrypt and decrypt messages sent between the SSH
client and the SSH server, using the SSH Authentication Method and Algorithm Settings window.
•
Finally, enable SSH on the Switch using the SSH Configuration window.
After completing the preceding steps, a SSH Client on a remote PC can be configured to manage the Switch using a
secure, in band connection.
SSH Global Settings
This window is used to display and configure the global SSH settings.
To view the following window, click
Security > SSH > SSH Global Settings
, as shown below:
Figure 9-90 SSH Global Settings Window
Содержание DGS-3130 Series
Страница 1: ......
