D-Link DGS-1510/ME Series, Справочное руководство

Страница: 477 / 654

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
473
Chapter 58 Protocol VLAN Command List
create dot1v_protocol_group group_id <id> {group_name <name 32>}
config dot1v_protocol_group [group_id <id> | group_name <name 32>] [add protocol [ethernet_2 |
ieee802.3_snap | ieee802.3_llc] <protocol_value> | delete protocol [ethernet_2 | ieee802.3_snap |
ieee802.3_llc] <protocol_value>]
delete dot1v_protocol_group [group_id <id> | group_name <name 32> | all]
show dot1v_protocol_group {[group_id <id> | group_name <name 32>]}
config port dot1v ports [<portlist> | all] [add protocol_group [group_id <id> | group_name <name 32>] [vlan
<vlan_name 32> | vlanid <id>] {priority <value 0-7>} | delete protocol_group [group_id <id> | all]]
show port dot1v {ports <portlist>}
58-1 create dot1v_protocol_group group_id
Description
This command is used to create a protocol group for protocol VLAN function.
Format
create dot1v_protocol_group group_id < id> {group_name <name 32>}
Parameters
<id> - Enter the group ID for protocol VLAN here.
group_name - (Optional) Specifies the name of the protocol group. The maximum length is 32 chars.
<name 32> - Enter the group name here. This name can be up to 32 characters long.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create a protocol group:
DGS-1510-28XMP/ME:admin# create dot1v_protocol_group group_id 10 group_name General_Group
Command: create dot1v_protocol_group group_id 10 group_name General_Group
Success.
DGS-1510-28XMP/ME:admin#
58-2 config dot1v_protocol_group
Description
This command is used to add a protocol to a protocol group. The selection of a protocol can be a pre-defined
protocol type or a user-defined protocol.