D-Link DGS-1510-10L/ME Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 67

background image

DGS-1510/ME Series Metro Ethernet Switch Hardware Installation Guide

30

After the Switch was successfully booted up, the username prompt will appear, as shown below.

DGS-1510-28XMP/ME Gigabit Ethernet Switch

Command Line Interface

Firmware: Build 1.00.018

Copyright(C) 2015 D-Link Corporation. All rights reserved.

UserName:

By default, there is no login user account configured on this Switch. Simply press the

Enter

key twice and the CLI

input cursor (

DGS-1510-28XMP/ME:admin#

) will be available, as shown below.

DGS-1510-28XMP/ME Gigabit Ethernet Switch

Command Line Interface

Firmware: Build 1.00.018

Copyright(C) 2015 D-Link Corporation. All rights reserved.

UserName:

PassWord:

DGS-1510-28XMP/ME:admin#

Now the switch can be configured.

NOTE:

By default, there are no login user accounts configured on this Switch. For security

reasons, it is highly recommended to create a login user account for this Switch.

Creating a User Account

This section will discuss how to create a login user account on this Switch. This login details will be applied not only
for access to the CLI, but also for access to the Web UI and other interfaces. The same username and password will
be used for these connections.

To create a user account, enter the following commands.

DGS-1510-28XMP/ME:admin# create account admin Administrator

Command: create account admin Administrator

Enter a case-sensitive new password:********

Enter the new password again for confirmation:********

Success.

DGS-1510-28XMP/ME:admin#

In the above example, the

create account

command was used to create a new user account. An admin account was

created with the username of ‘Administrator’. Immediately after the command was issued, the new password must be
entered and verified. Press

Enter

after every step to continue.

For more information about user account creation and management, refer to the

DGS-1510/ME Series CLI Reference

Guide

and the

DGS-1510/ME Series Web UI Reference Guide

.

«
...
33
34
35
36
37
...
»

Содержание DGS-1510-10L/ME




































































Отзывы:

Нет отзывов

Похожие инструкции для DGS-1510-10L/ME

Бренд: D-Link Страницы: 242

S5170-EI Series

Бренд: H3C Страницы: 46

Бренд: Touch-plate Страницы: 12

ProConnect PS2KVM2

Бренд: Linksys Страницы: 17

Digital Energy STS-400-25-3

Бренд: GE Страницы: 49

TEG-S50TXE SHEETS

Бренд: TRENDnet Страницы: 20

Бренд: GeoVision Страницы: 7

Бренд: JetNet Страницы: 20

IPES-5208T-X Series

Бренд: Lantech Страницы: 39

Бренд: W Box Technologies Страницы: 10

Бренд: NegoRack Страницы: 41

IDAN-LAN25255HR

Бренд: rtd Страницы: 24

Бренд: Belkin Страницы: 288

Бренд: Digital Equipment Страницы: 2

6047 HighWay Switch

Бренд: Oehlbach Страницы: 22

Бренд: ProxiMity Страницы: 4

Бренд: D-Link Страницы: 25

Бренд: D-Link Страницы: 25

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды