D-Link DGS-1250 Series страница 11 Скачать руководство пользователя

Страница: 11 / 62

DGS-1520 Series Gigabit Ethernet Smart Managed Switch Hardware Installation Guide

The behavior of the LEDs during the booting or rebooting process is described in the following table:

Switch

LED(s)

Behavior

DGS-1520-28
DGS-1520-52

Power LED

Blinks green when the switch is powered on.
Then, lights solid green until the system is ready.

Console LED

Lights solid green when the switch is powered on.
Then, returns to normal operation when the system is ready.

Fan LED

Lights solid green when the switch is powered on.
Then, returns to normal operation when the system is ready.

Stacking LED

Lights solid green when the switch is powered on.
Then, returns to normal operation when the system is ready.

Link/Act LEDs

Light solid green and amber when the switch is powered on.
Then, blinks green until the system is ready.

DGS-1520-28MP
DGS-1520-52MP

Power LED

Blinks green when the switch is powered on.
Then, lights solid green until the system is ready.

Console LED

Lights solid green when the switch is powered on.
Then, returns to normal operation when the system is ready.

Fan LED

Lights solid green when the switch is powered on.
Then, returns to normal operation when the system is ready.

Stacking LED

Lights solid green when the switch is powered on.
Then, returns to normal operation when the system is ready.

Link/Act Mode

LED

Lights solid green when the switch is powered on.
Then, returns to normal operation when the system is ready.

Link/Act LEDs

Light solid green and amber when the switch is powered on.
Then, blinks green until the system is ready.

Rear Panel Components

The rear panel features components like an AC power socket, a security lock, an electrical ground point, and more.

These components are described in detail below.

This following table lists the front panel components on

all

the switches in the series:

Port

Description

AC Power Connector

The AC power cord (included in the package) can be plugged into this receptacle

to supply the switch with 100-240 VAC power at 50-60 Hz.

Power Cord Retainer Hole

The power cord retainer hole is used to insert the power cord retainer to secure the

AC power cord.

Switch GND

Use an electrical grounding wire and connect one end of the wire to the switch

GND and the other end of the wire to an electrical grounding point most commonly

found on the Switch mounting rack itself.

Security Lock

The Kensington-compatible security lock can be used to connect the Switch to a

secure immovable device. Insert the lock into the notch and turn the key to secure

the lock. The lock-and-cable apparatus should be purchased separately.

Содержание DGS-1250 Series































































Результаты поиска

Содержание DGS-1250 Series

Отзывы:

Похожие инструкции для DGS-1250 Series

Бренды по названию

Популярные бренды

D-Link DGS-1250 Series, Руководство по установке оборудования

Результаты поиска

Содержание DGS-1250 Series

Отзывы:

Похожие инструкции для DGS-1250 Series

Бренды по названию

Популярные бренды