4 Configuration
DGS-1210 series Metro Ethernet Managed Switch User Manual
80
Figure 4.111 - Configuration > DDM > DDM Status Table
Configuration > DULD > DULD Global Settings
The DULD Global Settings page allows user to configure the DULD recover time.
Figure 4.112 - Configuration > DULD > DULD Global Settings
DULD Recover Time (60-1000000):
Specifies the DULD recover time.
Click the
Apply
button to accept the changes made.
Configuration > DULD > DULD Port Settings
The DULD Port Settings page allows user to configure the unidirectional link detection on ports.
Unidirectional link detection provides discovery mechanism based on 802.3ah to discovery its neighbor. If
the OAM discovery can complete in configured discovery time, it concludes the link is bidirectional.
Otherwise, it starts detecting task to detect the link status.
Figure 4.113 - Configuration > DULD > DULD Port Settings
From Port / To Port:
Specifies a range of ports to be configured.
Admin State:
Enable or disable the port unidirectional link detection status. The default is disabled.
Mode: Specifies the mode of DULD.
Normal –
Only log and event when a unidirectional link is detected.
Shutdown –
If any unidirectional link is detected, disable the port and log an event.
Discovery Time (5-65535):
Specifies these ports neighbor discovery time. If the discovery is timeout, the
unidirectional link detection will start. The default discovery time is
5
seconds.
Click
Apply
to make the configurations take effect.
Configuration > Multicast Forwarding & Filtering > Multicast Filtering
The Multicast Filtering Mode page allows user to set up the filtering mode.
Содержание DGS-1210 Series
Страница 159: ...140 ...