D-Link DGS-1210/ME series, Справочное руководство

Страница: 46 / 522

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
26
Restrictions None.
Example usage:
To terminate the current user’s console session:
DGS-1210-28MP/ME:5# logout
top
Purpose To display the CPU and memory information on the Switch.
Syntax
top
Description The top command is used to display the CPU and memory
information on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To display the CPU and memory information on the Switch:
Mem: 91188K used, 19752K free, 0K shrd, 6152K buff, 22476K cached
CPU: 0% usr 0% sys 0% nic 45% idle 0% io 0% irq 55% sirq
Load average: 2.01 1.40 0.62 2/109 418
PID PPID USER STAT VSZ %VSZ %CPU COMMAND
258 251 root S 210m 194% 0% TMR#
1 0 root S 1212 1% 0% init
251 1 root S 1204 1% 0% {rcS} /bin/sh /etc/init.d/rcS
417 258 root S 1200 1% 0% /bin/sh -c /usr/bin/top -n1 > /mnt/top
418 417 root R 1200 1% 0% /usr/bin/top -n1
181 2 root SW 0 0% 0% [spi1]
204 2 root SW 0 0% 0% [mtdblock3]
81 2 root SW 0 0% 0% [kswapd0]
257 2 root SWN 0 0% 0% [jffs2_gcd_mtd7]
6 2 root SW 0 0% 0% [kworker/u:0]
5 2 root SW< 0 0% 0% [kworker/0:0H]
9 2 root SW< 0 0% 0% [khelper]
55 2 root SW< 0 0% 0% [kblockd]
10 2 root SW 0 0% 0% [kdevtmpfs]
11 2 root SW 0 0% 0% [kworker/u:1]
8 2 root SW 0 0% 0% [migration/0]
4 2 root SW 0 0% 0% [kworker/0:0]
194 2 root SW 0 0% 0% [mtdblock1]
2 0 root SW 0 0% 0% [kthreadd]
53 2
ping
Purpose To test the connectivity between network devices.
Syntax ping <ipaddr> {times <value 1-255> | timeout <sec 1-99> | size
<short 0-2080>}