3 Getting Started
D-Link Smart Managed Switch User Manual
22
Figure 3.2 –Enter the IP address 10.90.90.90 in the web browser
NOTE:
The switch's factory default IP address is
10.90.90.90 with a subnet mask of 255.0.0.0 and
a default gateway of 0.0.0.0.
The web configuration can also be accessed through the SmartConsole Utility. Open the SmartConsole
Utility and double-click the switch as it appears in the Monitor List. This will automatically load the web
configuration in your web browser.
When the following logon dialog box appears, enter the password and choose the language of the Web-
based Management interface then click
OK
.
The switch supports 10 languages including English, Traditional Chinese, Simplified Chinese, German,
Spanish, French, Italian, Portuguese, Japanese and Russian. By default, the password is
admin
and the
language is
English
.
Figure 3.3 – Logon Dialog Box
Smart Wizard
After a successful login, the Smart Wizard will guide you through essential settings of the D-Link Smart
Managed Switch. Please refer to the Smart Wizard Configuration section for details.
Web-based Management
By clicking the
Exit
button in the Smart Wizard, you will enter the Web-based Management interface. Please
refer to Chapter 4
Web-based Switch Configuration
