D-Link DGS-1100-06/ME Скачать руководство пользователя страница 137

Страница: 137 / 275

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide

125

DGS-1100-06/ME:5#create vlan v1 tag 3
Command: create vlan v1 tag 3

Success
DGS-1100-06/ME:5#

delete vlan

Purpose

To delete a previously configured VLAN on the Switch.

Syntax

delete vlan [<vlan_name 20> | vlanid <int 2-4094>]

Description

The

delete vlan

command deletes a previously configured VLAN on

the Switch.

Parameters

<vlan_name 20>

− The name of the VLAN to be deleted.

vlanid <int 2-4092>

− The VLAN of the VLAN to be deleted.

Restrictions

Only administrator or operator-level users can issue this command.

A user is required to disable Guest VLAN before deleting a VLAN.

Example usage:

To remove a vlan which VLAN ID is 2:

DGS-1100-06/ME:5#delete vlan vlanid 2
Command: delete vlan vlanid 2

Success
DGS-1100-06/ME:5#

config vlan

Purpose

To add additional ports to a previously configured VLAN and to
modify a VLAN name.

Syntax

config vlan [<vlan_name 20> | vlanid <vlanid 1-4094>] [[add
[tagged | untagged] | delete ] <portlist>

Description

The

config vlan

command allows the user to add or delete ports to

the port list of a previously configured VLAN. You can specify the
additional ports as tagging, untagging, or forbidden. The default is to
assign the ports as untagged.

Parameters

<vlan_name 20>

− The name of the VLAN to be configure.

vlanid <vlanid 1-4094 >

− The ID of the VLAN to which to add ports.

add

− Specifies that ports are to be added to a previously created

vlan.

delete

- Specifies that ports are to be deleted from a previously

created vlan.

tagged

− Specifies the additional ports as tagged.

untagged

− Specifies the additional ports as untagged.

<portlist>

− A port or range of ports to be added to or deleted from

the VLAN.

Restrictions

Only administrator or operator-level users can issue this command.

Example usage:

To add ports 5 as tagged ports to the VLAN 3:

Содержание DGS-1100-06/ME




















































































































































































































































































Результаты поиска

Содержание DGS-1100-06/ME

Отзывы:

Похожие инструкции для DGS-1100-06/ME

Бренды по названию

Популярные бренды

D-Link DGS-1100-06/ME, Справочное руководство CLI

Результаты поиска

Содержание DGS-1100-06/ME

Отзывы:

Похожие инструкции для DGS-1100-06/ME

Бренды по названию

Популярные бренды